FC 111 - $499.95 DSRP


Distributor Suggested Retail Price
FC 111

DSRP: $499.95

Our most powerful extensive-use edger, with 10% more engine power than the FC 96.

The STIHL FC 111 edger delivers the power you need to get your landscaping job done. With 30% longer run times than the previous model, the FC 111 is ideal to cut through tough obstacles. This model features a 31.4 cc low-emission engine, a large 710 cc fuel tank and a vertical pleated paper air filter for enhanced filtration and extended service intervals. With its simplified starting procedure e...Read More
Print Spec Sheets
FC 111 Specifications
DISPLACEMENT 31.4 cc (1.9 cu. in.)
ENGINE POWER 1.05 kW (1.4 bhp)
WEIGHT 6.2 kg (13.7 lbs.)
FUEL CAPACITY 710 cc (24.0 oz.)
BLADE SIZE 20.3 cm (8.0 in.)
ARBOR SIZE 25.4 mm (1.0 in.)
GEAR RATIO AND BLADE SPEED 1:2.09 4,800 rpm
POWER SOURCE gas
Model Features
  • Zoom
    Built in the USA
    Indicates products that are built in the United States from domestic and foreign parts and components.

    More Information

  • Zoom
    Reduced-Emission Engine Technology - Caring for Nature
    The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

    More Information

  • Zoom
    Skid Plate
    All STIHL edgers come equipped with a skid plate to protect the gearbox during use.
  • Zoom
    "Line of Sight" Marking
    A notch on top of the edger’s guard helps guide the user during use, allowing for increased control and helping to create cleaner, more precise cuts.
  • Zoom
    "Open" Guard Design
    The professional “open” guard design helps minimize clogging, allowing for more efficient cutting.
  • Zoom
    Adjustable depth wheel
    The adjustable depth wheel allows user to control the depth of the cut.
Standard Features
  • Zoom
    Common Features for Edgers
    View the features common to many STIHL edgers.

Important Information
Note: STIHL engine products with the Caring for Nature logo are cleaner than EPA Standards for exhaust emissions.
Note: STIHL recommends use of fuel with no more than 10% Ethanol content. Using fuel with greater than 10% Ethanol content may cause damage to your equipment and may void your STIHL warranty. Learn More…
WARNING! Improper use of any power tool may cause serious or fatal injury. Read, understand and follow carefully the operating and safety instructions in your instruction manual before using such products.

STIHL products sold through U.S. STIHL Dealers are for distribution in the United States only.
Click to view the STIHL Limited Warranty Time Periods
Optional Accessories
  • Zoom
    Gearbox Attachments
    Gearbox attachments are available for this model. View the interchangeable gearbox chart to find out which attachments work with this model.
  • Zoom
    Straps and Harnesses
    They distribute the load from your hands to your shoulders. They also help reduce operator fatigue and make it easier to use trimmers, brushcutters and clearing saws for extended periods.
We Also Suggest
  • HP Ultra 2-Cycle Engine Oil Zoom
    HP Ultra 2-Cycle Engine Oil
    HP Ultra is a fully synthetic 2-cycle engine oil specially suited for high performance chainsaws and power tools. This oil has outstanding engine cleaning characteristics, plus “ultra” superior lubricating qualities in comparison to other 2-cycle engine oils. It is ideal for use in STIHL 4-MIX® engines. This oil is biodegradable, degrading by 80% in 21 days.

    •2.6 oz. bottle makes 1 gallon mix

    •5.2 oz. bottle makes 2 gallon mix

    •6.4 oz. bottle makes 2 1/2 gallon mix

    •12.8 oz. bottle makes 5 gallon mix

    STIHL recommends a mix of 50:1 high-quality 89 octane or higher unleaded gasoline to STIHL engine oil. This same mix ratio should be used during break-in.

For Your Safety
  • STIHL Proscaper Series™  Gloves Zoom
    STIHL Proscaper Series™ Gloves
    Woven elastic back flexes to allow total movement freedom. Custom-fit wrist strap closure for personalized comfort. Sizes available M, L, XL.

Are You Ready for a STIHL?

FC 111 is rated 3.0 out of 5 by 6.
Rated 1 out of 5 by from Don’t waste your money Difficult to start, runs poorly, loses power when the job gets tough. My FC90 is a much better machine.
Date published: 2017-09-27
Rated 1 out of 5 by from Don't waste your hard-earned money. For a Stihl machine, doesn't live up to expectations. Very poor running, difficult/frustrating to start, loses power when the job gets tough, requires a different blade than any other Stihl edger. Took it back to the dealer and will continue to use my FC90, it's a BEAST!!!
Date published: 2017-09-26
Rated 5 out of 5 by from LOVE IT Love all my Stihl products - But your retailers at Lowcountry Hardware on Mt. Pleasant are the REAL reason I shop Stihl (sorry). I cannot tell you how customer focused they are! they know your products and they treat me like Im the most important customer they have. VERY VERY professional.
Date published: 2017-09-08
Rated 1 out of 5 by from not dependable Started the edger for first time but would not turn the blade.Took the Edger back to Stines where it was purchased and service tech made repairs.Ran it one day with no problems. Started it second day with no problems but it would not turn the blade. Taking it back the second time for repairs.
Date published: 2017-05-16
Rated 5 out of 5 by from THE BEST EVER This product is very powerful, accurate and great price.
Date published: 2017-04-17
Rated 5 out of 5 by from Great Product Purchased this model today. Has plenty of power and is simple and easy to use. I'll have a better review once I have put a few hours on it. If it's like all my other Stihl items my self or anyone else won't be disappointed
Date published: 2016-11-30
  • y_2017, m_12, d_12, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_fc111, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_stihl